There is no planet B. We’re here as a supplier to support the carbon neutral journey.

Working with suppliers for a sustainable future

europanel are 100% committed to wood waste recycling initiatives.

reDirect Wood Recycling was established to provide a closed loop service on recycling wood and particleboard to decrease the amount going to landfill waste.

The reDirect Wood Recycling initiative reclaims materials that would otherwise go to landfill, thereby reducing waste, preserving plantation pine forests, and protecting the environment for future generations.

The manufacturing and production of new particleboard utilises the use of recycled wood and off cuts. By participating in wood off cut collection through the reDirect Wood Recycling initiative we are contributing to sustainable manufacturing practices.

Reduce Reuse Recycle

State-of-the-art dust extraction system

Fully sealed airtight waste bins effectively eliminate airborne dust particles being released into the atmosphere during manufacturing processes.

Automated warehouse system

Optimises cutting patterns which reduces offcuts and waste from board products resulting in less waste.

Cover sheet collection and return

Provided as protection on board products are returned to supplier for reuse, not landfill.

Europanel’s solar power initiative

Committed to reducing our carbon footprint with our 100kW solar system, consisting of 320+ panels on the roof of our joinery factory in Auburn NSW provides an output of approximately 360 kWh per day.

Europanel’s solar power initiative

Committed to reducing our carbon footprint with our 100kW solar system, consisting of 320+ panels on the roof of our joinery factory in Auburn NSW provides an output of approximately 360 kWh per day.

Certification and compliance

Chain of Custody | FSC Accredited

 

Our FSC certification is a a guarantee that the products we buy come from responsible sources and support forest conservation.

The FSC trademarks offer social benefits and enable the market to provide an incentive for better forest management.

Green Star

 

The built environment is currently the world’s single largest contributor to greenhouse gas emissions.

We can collaborate to improve a project’s sustainability performance with the goal of achieving Green Star Design & As Built and Green Star Interiors certification.

NABERS

 

We know that environmentally friendly buildings are not only better for the planet, but they also make happier and healthier spaces that we can all thrive in.

We can work together to achieve the desired NABERS rating for indoor environments.

WELL

 

The WELL Sound concept aims to bolster occupant health and well-being through the identification and mitigation of acoustical comfort parameters that shape occupant experiences in the built environment.

europanel’s range of acoustic products can contribute to the overall acoustical comfort of a space.

LEED

 

LEED provides a framework for healthy, highly efficient, and cost-saving green buildings. europanel can collaborate on the best products to achieve LEED for Interior Design and Construction certification.

Certification and compliance

Chain of Custody | FSC Accredited

 

Our FSC certification is a a guarantee that the products we buy come from responsible sources and support forest conservation.

The FSC trademarks offer social benefits and enable the market to provide an incentive for better forest management.

Green Star

 

The built environment is currently the world’s single largest contributor to greenhouse gas emissions.

We can collaborate to improve a project’s sustainability performance with the goal of achieving Green Star Design & As Built and Green Star Interiors certification.

NABERS

 

We know that environmentally friendly buildings are not only better for the planet, but they also make happier and healthier spaces that we can all thrive in.

We can work together to achieve the desired NABERS rating for indoor environments.

WELL

 

The WELL Sound concept aims to bolster occupant health and well-being through the identification and mitigation of acoustical comfort parameters that shape occupant experiences in the built environment.

europanel’s range of acoustic products can contribute to the overall acoustical comfort of a space.

LEED

 

LEED provides a framework for healthy, highly efficient, and cost-saving green buildings. europanel can collaborate on the best products to achieve LEED for Interior Design and Construction certification.

europanel products are 100% Australian made and manufactured with sustainable qualities

 

MDF substrate

Polytec is our main supplier of all our medium density fibreboard (MDF), sourced only from Global GreenTag Certified selected suppliers, using E0 MDF raw material.

MDF fibre material is generated from Managed Renewable Plantation Pine and is fabricated locally within Australia.

MDF is the most cost-effective, sustainable, and versatile substrate material available. Suitable for prefinished low-pressure laminate, veneer, and paint.

europanel work with suppliers to have MDF sheets laid to project specific custom sizes where possible, to minimise material wastage which inevitably contribute to landfill.

Products: euroHUSH, euroBLADE, euroSPLINE, euroSHAPE, euroCSC.

Finishes: Prefinished low pressure laminate melamine finishes, polyurethane painted finishes, timber veneered finishes.

 

Timber veneer

Briggs Veneers is our main supplier of natural timber veneer. eco-cert FSC & PEFC wood veneers are independently certified to be from responsibly managed forests and controlled sources. The have all the beauty and warmth that can only come from using real wood. At the same time, the FSC/PEFC certification gives the certainty that trees are being regrown to give a continuing supply in perpetuity, with the Briggs FSC & PEFC Chain of Custody certificates ensuring supply chain integrity from forest to market. eco-cert veneers are suitable for all low wear dry vertical interior applications such as furniture and panelling, particularly where Green Building Council of Australia Green Star points are required.

Most species are available with PEFC and FSC Chain of Custody.

Products: euroHUSH, euroBLADE, euroSPLINE, euroSHAPE, euroCSC.

Finishes: Natural and eco-cert timber veneer finishes.

 

Solid timber

All solid timber we use is sourced from selected PEFC and FSC suppliers. Like timber veneer, the timber used in the europanel ranges are all sourced from suppliers who only source their raw material from renewable forests.

europanel carry Chain of Custody from suppliers to ensure the sustainability chain is continued from source to site.

Products:  euroBLADE, euroSHAPE, euroCSC.                                                                                                                                                                             

Finishes: PEFC and FSC certified timber species.

 

Polyurethane

Europanel has its own inhouse polishing and baking facility, where we only use low Volatile Organic Compounds (Low VOC) based materials.

All spraying is carried out offsite in our Sydney based factory in our filtered spray booths.  

Where possible europanel uses water based solvent finishes as they contain no formaldehyde and can be less harmful to the environment.

Products: euroHUSH, euroBLADE, euroSPLINE, euroSHAPE, euroCSC.

Finishes: Polyurethane colours, clear finishes, and stain finishes.

 

Insulation

CSR Martini products are used for the acoustic insulation of our products. 100% of CSR Martini products have a full, easily accessible product health declaration for health assessments and Global GreenTag awarded CSR Martini a Platinum Health Rating – the highest health level achievable.

Their range of products have achieved the highest achievable award of GreenRate | Level A (verified ISO 14024 and ISO 17065) making their GreenTag products ideal for GreenStar Projects.

Products: euroHUSH, euroBLADE, euroSHAPE, euroTEX.                                                                                                       

Finishes: Backing insulation.

europanel products are 100% Australian made and manufactured with sustainable qualities

MDF substrate

Polytec is our main supplier of all our medium density fibreboard (MDF), sourced only from Global GreenTag Certified selected suppliers, using E0 MDF raw material.

MDF fibre material is generated from Managed Renewable Plantation Pine and is fabricated locally within Australia.

MDF is the most cost-effective, sustainable, and versatile substrate material available. Suitable for prefinished low-pressure laminate, veneer, and paint.

europanel work with suppliers to have MDF sheets laid to project specific custom sizes where possible, to minimise material wastage which inevitably contribute to landfill.

ProductseuroHUSH, euroBLADE, euroSPLINE, euroSHAPE, euroCSC.

Finishes: Prefinished low pressure laminate melamine finishes, polyurethane painted finishes, timber veneered finishes.

Timber veneer

Briggs Veneers is our main supplier of natural timber veneer.

eco-cert FSC & PEFC wood veneers are independently certified to be from responsibly managed forests and controlled sources. The have all the beauty and warmth that can only come from using real wood. At the same time, the FSC/PEFC certification gives the certainty that trees are being regrown to give a continuing supply in perpetuity, with the Briggs FSC & PEFC Chain of Custody certificates ensuring supply chain integrity from forest to market. eco-cert veneers are suitable for all low wear dry vertical interior applications such as furniture and panelling, particularly where Green Building Council of Australia Green Star points are required.

Most species are available with PEFC and FSC Chain of Custody.

ProductseuroHUSH, euroBLADE, euroSPLINE, euroSHAPE, euroCSC.

FinishesNatural and eco-cert timber veneer finishes.

Solid timber

All solid timber we use is sourced from selected PEFC and FSC suppliers.

Like timber veneer, the timber used in the europanel ranges are all sourced from suppliers who only source their raw material from renewable forests.

europanel carry Chain of Custody from suppliers to ensure the sustainability chain is continued from source to site.

ProductseuroBLADE, euroSHAPE, euroCSC.

FinishesPEFC and FSC certified timber species.

Polyurethane

Europanel has its own inhouse polishing and baking facility, where we only use low Volatile Organic Compounds (Low VOC) based materials.

All spraying is carried out offsite in our Sydney based factory in our filtered spray booths.  

Where possible europanel uses water based solvent finishes as they contain no formaldehyde and can be less harmful to the environment.

ProductseuroHUSH, euroBLADE, euroSPLINE, euroSHAPE, euroCSC.

FinishesPolyurethane colours, clear finishes, and stain finishes.

Insulation

CSR Martini products are used for the acoustic insulation of our products.

100% of CSR Martini products have a full, easily accessible product health declaration for health assessments and Global GreenTag awarded CSR Martini a Platinum Health Rating – the highest health level achievable.

Their range of products have achieved the highest achievable award of GreenRate | Level A (verified ISO 14024 and ISO 17065) making their GreenTag products ideal for GreenStar Projects.

ProductseuroHUSH, euroBLADE, euroSHAPE, euroTEX.

FinishesBacking insulation.

Be inspired with our sustainable projects

347 Kent St

347 Kent St

  • 5 Star NABERS
  • euroSHAPE S2/S3 domed and fluted profiles
  • euroHUSH feature ceiling (not shown)
  • PEFC sourced solid Spotted Gum timber
UTS Central

UTS Central

  • 5 Star Green Star

  • euroHUSH S4

  • 6,000+ sqm of Global GreenTag Certified prefinished panels